
QT801 and QT802 Square-Wave
24 pin DDIP
Q-TECH Corporation
10150 W. Jefferson Blvd.
Culver City, CA 90232
3.2.1 Physical Characteristics
3.2.1.1 Dimensions
- The TCXO outline dimensions and terminal connections shall be as shown in Figure 1
herein.
3.2.1.2 Weight
- The TCXO shall weigh less than or equal to 15 grams.
3.2.1.3 Materials
- The TCXO package body and lead finish shall be gold in accordance with MIL-PRF-38534.
3.3 Design and Construction
The design and construction of the crystal oscillator shall be as specified herein. As a minimum, the
oscillators shall meet the design and construction requirements of MIL-PRF-55310, except element
evaluation shall be as specified in 3.3.1
Non-Destruct Wire Bond Pull
100%, MIL-STD-883, Method 2023 (2.4 grams)
MIL-STD-883, methods 2017 & 2032 condition K (class S). During the
time interval between final internal visual inspection and preparation for
sealing, hybrid crystal oscillators shall be stored in a dry, controlled
environment as defined in MIL-STD-883, method 2017 or in a vacuum
bake oven.
48 hrs minimum @ +150°C MIL-STD-883, Method 1008 TC B
MI-STD 883, Method 1011, TC A
MI-STD 883, Method 1010, TC B
MIL-STD-883, Method 2001, TC A (5000 gs, Y1 Axis only)
MIL-STD-883, Method 2020, TC B
Frequency, Output levels, Input Current@ +25°C
Burn-In (Powered with load)
100% Method 1014, (TC A1 for fine leak and TC C for gross leak)
Frequency, Output levels, Input Current
@ +25°C & Temp Extremes listed on the Electrical Specification
MIL-STD-883, Method 2012 class S
ITAR-CONTROLLED Q-TECH PROPRIETARY DO NOT COPY OR DISTRIBUTE WITHOUT Q-TECH APPROVAL
Comentarios a estos manuales